Solar hydrogen production currently employs pure water to prevent side reactions and damage to materials. Nevertheless, pure water is an increasingly valuable resource, and alternative substrates are required. In this work, we investigated a strategy for photoelectrochemical (PEC) solar hydrogen production from surfactant-rich wastewater. Sodium dodecyl sulfate (SDS) was used as a test-surfactant because of (1) its large use in industrial and domestic applications and consequently relevant concentration in wastewaters and (2) its potential suitability as a hole scavenger to enhance H2production. The working electrode of the PEC cell was a Ti-doped hematite photoanode, fully characterized to obtain information about crystallinity, morphology, and optical properties. Ongoing mineralization of SDS at the photoanode was characterized by the Gas Chromatographic (GC) detection of CO2, with a radical-mediated oxidation mechanism revealed by fluorescence-based methods and Electrochemical Impedance Spectroscopy (EIS). H2production with simultaneous SDS oxidation and oxygen evolution, at 2.15 V RHE applied voltage, was quantified by GC. With a 1 cm2electrode, the production rate was 4.6 ± 0.3 μmol/h with a power saving efficiency (η, with respect to dark conditions) of 0.3%. A scale-up to 16.8 cm2area resulted in 22 ± 2 μmol/h with a η of 0.13%. These results provide a proof-of-concept for the valorization of surfactant-rich wastewaters as solar H2substrates.

Solar hydrogen production currently employs pure water to prevent side reactions and damage to materials. Nevertheless, pure water is an increasingly valuable resource, and alternative substrates are required. In this work, we investigated a strategy for photoelectrochemical (PEC) solar hydrogen production from surfactant-rich wastewater. Sodium dodecyl sulfate (SDS) was used as a test-surfactant because of (1) its large use in industrial and domestic applications and consequently relevant concentration in wastewaters and (2) its potential suitability as a hole scavenger to enhance H2 production. The working electrode of the PEC cell was a Ti-doped hematite photoanode, fully characterized to obtain information about crystallinity, morphology, and optical properties. Ongoing mineralization of SDS at the photoanode was characterized by the Gas Chromatographic (GC) detection of CO2, with a radical-mediated oxidation mechanism revealed by fluorescence-based methods and Electrochemical Impedance Spectroscopy (EIS). H2 production with simultaneous SDS oxidation and oxygen evolution, at 2.15 V RHE applied voltage, was quantified by GC. With a 1 cm2 electrode, the production rate was 4.6 +/- 0.3 mu mol/h with a power saving efficiency (eta, with respect to dark conditions) of 0.3%. A scale-up to 16.8 cm2 area resulted in 22 +/- 2 mu mol/h with a eta of 0.13%. These results provide a proof-of-concept for the valorization of surfactant-rich wastewaters as solar H2 substrates.

Photoelectrochemical Hydrogen Production from Surfactant-Rich Wastewaters: Proof-of-Concept and Mechanisms Investigation

Stefano Caramori
Conceptualization
;
Michele Mazzanti
Membro del Collaboration Group
;
2025

Abstract

Solar hydrogen production currently employs pure water to prevent side reactions and damage to materials. Nevertheless, pure water is an increasingly valuable resource, and alternative substrates are required. In this work, we investigated a strategy for photoelectrochemical (PEC) solar hydrogen production from surfactant-rich wastewater. Sodium dodecyl sulfate (SDS) was used as a test-surfactant because of (1) its large use in industrial and domestic applications and consequently relevant concentration in wastewaters and (2) its potential suitability as a hole scavenger to enhance H2 production. The working electrode of the PEC cell was a Ti-doped hematite photoanode, fully characterized to obtain information about crystallinity, morphology, and optical properties. Ongoing mineralization of SDS at the photoanode was characterized by the Gas Chromatographic (GC) detection of CO2, with a radical-mediated oxidation mechanism revealed by fluorescence-based methods and Electrochemical Impedance Spectroscopy (EIS). H2 production with simultaneous SDS oxidation and oxygen evolution, at 2.15 V RHE applied voltage, was quantified by GC. With a 1 cm2 electrode, the production rate was 4.6 +/- 0.3 mu mol/h with a power saving efficiency (eta, with respect to dark conditions) of 0.3%. A scale-up to 16.8 cm2 area resulted in 22 +/- 2 mu mol/h with a eta of 0.13%. These results provide a proof-of-concept for the valorization of surfactant-rich wastewaters as solar H2 substrates.
2025
Chesini, Alessandro; Grandi, Silvia; Caramori, Stefano; Mazzanti, Michele; Matteo Martini, Luca; Khan Khakemin Khan, Khakemin; Orlandi, Michele; Miote...espandi
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/2614091
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact