A Finite Element-Boundary Integral Equation (FE-BIE) coupling method is proposed to investigate a flexible bar weakly attached to an elastic orthotropic half-plane. Firstly, the analysis focused on the case of a bar subjected to horizontal forces and thermal loads considering interfacial displacements linearly proportional to the tangential traction. Secondly, the debonding behaviour of a composite reinforcement glued to a substrate has been modelled. Using an incremental nonlinear analysis, a bilinear elastic-softening interfacial traction-slip law has been implemented simulating the delamination of pure Mode II. Finally, the influence of the anchorage length on the ultimate bearing capacity of the adhesive joint has been investigated.
Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model
TEZZON E.Primo
;TRALLI A.Secondo
;TULLINI N.
Ultimo
2018
Abstract
A Finite Element-Boundary Integral Equation (FE-BIE) coupling method is proposed to investigate a flexible bar weakly attached to an elastic orthotropic half-plane. Firstly, the analysis focused on the case of a bar subjected to horizontal forces and thermal loads considering interfacial displacements linearly proportional to the tangential traction. Secondly, the debonding behaviour of a composite reinforcement glued to a substrate has been modelled. Using an incremental nonlinear analysis, a bilinear elastic-softening interfacial traction-slip law has been implemented simulating the delamination of pure Mode II. Finally, the influence of the anchorage length on the ultimate bearing capacity of the adhesive joint has been investigated.| File | Dimensione | Formato | |
|---|---|---|---|
|
Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model.pdf
solo gestori archivio
Descrizione: Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model
Tipologia:
Full text (versione editoriale)
Licenza:
NON PUBBLICO - Accesso privato/ristretto
Dimensione
1.08 MB
Formato
Adobe PDF
|
1.08 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
|
Tezzon Tralli Tullini - post-print.pdf
Open Access dal 28/03/2018
Descrizione: Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model - post-print
Tipologia:
Post-print
Licenza:
Creative commons
Dimensione
1.05 MB
Formato
Adobe PDF
|
1.05 MB | Adobe PDF | Visualizza/Apri |
|
EABE_2018_14.pdf
accesso aperto
Descrizione: Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model - pre-print
Tipologia:
Pre-print
Licenza:
Creative commons
Dimensione
447.08 kB
Formato
Adobe PDF
|
447.08 kB | Adobe PDF | Visualizza/Apri |
I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
