The thermal analysis of a high performance brushless synchronous electric motor with permanent magnets and water jacket cooling is presented. The analysis is carried out following a lumped parameter thermal network approach which allows to identify the most important thermal paths in the motor and the main parameters influencing them. Thanks to its simplicity, the solution of such a thermal network model is very fast, allowing a large number of what-if scenarios to be computed over a short amount of time. For this reason, the model is coupled with external tools for performing systematic sensitivity analyses and optimizations. Goal of the investigation is the reduction of the windings temperature being this temperature inversely proportional to the efficiency and the power delivered by the motor. The sensitivity analysis, performed over a series of material, geometric, and operational factors, leads to the identification of the most relevant parameters influencing the thermal behaviour of the motor. A series of optimizations, focusing on these parameters and including suitable constraints granting the well-posedness of the problem and the feasibility of the solution, bring to the definition of an optimum layout of the water jacket and of the stator geometries. The optimized geometry allows a significant reduction of the windings temperature to be achieved.
Thermal management of a Formula E electric motor: Analysis and optimization
Cavazzuti, Marco
Primo
;
2019
Abstract
The thermal analysis of a high performance brushless synchronous electric motor with permanent magnets and water jacket cooling is presented. The analysis is carried out following a lumped parameter thermal network approach which allows to identify the most important thermal paths in the motor and the main parameters influencing them. Thanks to its simplicity, the solution of such a thermal network model is very fast, allowing a large number of what-if scenarios to be computed over a short amount of time. For this reason, the model is coupled with external tools for performing systematic sensitivity analyses and optimizations. Goal of the investigation is the reduction of the windings temperature being this temperature inversely proportional to the efficiency and the power delivered by the motor. The sensitivity analysis, performed over a series of material, geometric, and operational factors, leads to the identification of the most relevant parameters influencing the thermal behaviour of the motor. A series of optimizations, focusing on these parameters and including suitable constraints granting the well-posedness of the problem and the feasibility of the solution, bring to the definition of an optimum layout of the water jacket and of the stator geometries. The optimized geometry allows a significant reduction of the windings temperature to be achieved.File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S1359431118375707-main.pdf
solo gestori archivio
Descrizione: versione editoriale
Tipologia:
Full text (versione editoriale)
Licenza:
NON PUBBLICO - Accesso privato/ristretto
Dimensione
2.52 MB
Formato
Adobe PDF
|
2.52 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
2019_Cavazzuti_ATEpreprint.pdf
accesso aperto
Descrizione: versione editoriale
Tipologia:
Pre-print
Licenza:
PUBBLICO - Pubblico con Copyright
Dimensione
1.45 MB
Formato
Adobe PDF
|
1.45 MB | Adobe PDF | Visualizza/Apri |
I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.