The uncertainty often observed in experimental strengths of masonry constituent materials makes critical the selection of the appropriate inputs in the finite elements limit analysis of complex masonry buildings, as well as requires modeling the building ultimate load as a random variable. The most direct approach to solve limit analysis problems in presence of random input parameters is the use of extensive Monte Carlo (MC) simulations. Nevertheless, when MC methods are used to estimate the collapse load cumulative distribution of a masonry structure, large scale linear programming problems must be numerically tackled several times, so precluding the practical utilization of large scale MC simulations. To reduce the computational cost of a traditional MC approach, in the present paper direct computer calculations are replaced with inexpensive Response Surface (RS) models. In particular, RS models are utilized for the limit analysis of a masonry structure in- and out-of-plane loaded, assuming input mechanical properties as random parameters. Two different RS models are analyzed, derived respectively from small scale (20 replicates) MC and Latin Hypercube (LH) simulations. The accuracy of the estimated RS models, as well as the good estimations of the collapse load cumulative distributions obtained via polynomial RS models in comparison with large scale MC simulations, show how the proposed approach could be a useful tool in problems of technical interest.

Limit analysis of masonry structures accounting for uncertainties in constituent materials mechanical properties

BENASCIUTTI, Denis;
2008

Abstract

The uncertainty often observed in experimental strengths of masonry constituent materials makes critical the selection of the appropriate inputs in the finite elements limit analysis of complex masonry buildings, as well as requires modeling the building ultimate load as a random variable. The most direct approach to solve limit analysis problems in presence of random input parameters is the use of extensive Monte Carlo (MC) simulations. Nevertheless, when MC methods are used to estimate the collapse load cumulative distribution of a masonry structure, large scale linear programming problems must be numerically tackled several times, so precluding the practical utilization of large scale MC simulations. To reduce the computational cost of a traditional MC approach, in the present paper direct computer calculations are replaced with inexpensive Response Surface (RS) models. In particular, RS models are utilized for the limit analysis of a masonry structure in- and out-of-plane loaded, assuming input mechanical properties as random parameters. Two different RS models are analyzed, derived respectively from small scale (20 replicates) MC and Latin Hypercube (LH) simulations. The accuracy of the estimated RS models, as well as the good estimations of the collapse load cumulative distributions obtained via polynomial RS models in comparison with large scale MC simulations, show how the proposed approach could be a useful tool in problems of technical interest.
2008
Benasciutti, Denis; Milani, G.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/2329718
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact