We have developed a digital radiography system based on double sided microstrip silicon crystals. The detector is 300 μm thick, equipped with 320 channels for each side. The strip pitch is 100 μm. The read-out system consists of a VLSI integrated analog circuit with low noise preamplification, pulse shaping, threshold discrimination. The two main issues of this Front End chip are low noise and good timing information. It has 64 channels which provide a digital pulse whenever one strip of the detector is hit. The channel number is then encoded by the digital chip which is directly bonded to the analog Front-End. This is accomplished on both sides independently. To reconstruct the spatial position an XY coincidence unit is used. The two signals produced along the two coordinates are time related by sampling the Front-End outputs with a common clock signal. The two correlated signals are then presented to the coincidence unit at the same clock cycle. To accomplish the on-line image reconstruction the time unit recognizes these correlated signals as one real event and updates a related histogram. This system is suitable for X-ray imaging, optimized for stereotaxic mammography in the 18- 22 keV photon energy range.

Single photon 2-D imaging system prototype for biopsy digital mammography

GAMBACCINI, Mauro;MARZIANI, Michele;TAIBI, Angelo;TRIPICCIONE, Raffaele;
1997

Abstract

We have developed a digital radiography system based on double sided microstrip silicon crystals. The detector is 300 μm thick, equipped with 320 channels for each side. The strip pitch is 100 μm. The read-out system consists of a VLSI integrated analog circuit with low noise preamplification, pulse shaping, threshold discrimination. The two main issues of this Front End chip are low noise and good timing information. It has 64 channels which provide a digital pulse whenever one strip of the detector is hit. The channel number is then encoded by the digital chip which is directly bonded to the analog Front-End. This is accomplished on both sides independently. To reconstruct the spatial position an XY coincidence unit is used. The two signals produced along the two coordinates are time related by sampling the Front-End outputs with a common clock signal. The two correlated signals are then presented to the coincidence unit at the same clock cycle. To accomplish the on-line image reconstruction the time unit recognizes these correlated signals as one real event and updates a related histogram. This system is suitable for X-ray imaging, optimized for stereotaxic mammography in the 18- 22 keV photon energy range.
1997
Cisternino, A; DEL GUERRA, A; Folli, M; Gambaccini, Mauro; Marziani, Michele; Marchesini, R; Taibi, Angelo; Bisogni, Mg; Bottigli, U; Fantacci, E; Ros...espandi
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/1203360
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact