Anisotropy of small strain stiffness of Ticino and Kenya sand from seismic wave propagation measured in triaxial testing

The small strain stiffness and anisotropic nature of two sands with different geological origin have been determined via laboratory seismic tests performed in a triaxial cell. Dry triaxial reconstituted specimens of Ticino river silica sand (TS) and of Kenya carbonatic sand (KS) were subjected to Isotropic and anisotropic states of effective stress; then both shear and constrained compression waves were propagated in vertical, horizontal and oblique directions by means of five couples of piezoelectric transducers especially arranged in the specimens. The propagated compression and shear waves allow the assessment of the constrained M0 and shear G0 moduli respectively, at very small strains where, as a first approximation many soils can be assumed, from an engineering point of view, to behave as an elastic cross-anisotropic medium with a vertical axis of symmetry. This paper, after a brief description of the novel measuring technique adopted and of the tested materials, summarises the test results and their interpretation in order to separate the effects of the fabric anisotropy from those produced by the state of effective stresses on soil stiffness. The stiffness and anisotropic response of the two tested sands are compared. Finally the results enable us to establish five independent constants of the cross-anisotropic elasticity model, which appears to be appropriate to reproduce the behaviour at small strain of the two sands.