This paper presents a procedure for the determination of the actual configuration of the general geometry Stewart platform (GSP), a fully-parallel manipulator that features two rigid bodies connected to each other via spherical pairs by six controlledlength legs. The six leg length measurements, provided by the displacement sensors incorporated in the leg hardware equipment, do not make it possible to uniquely find the GSP configuration because several configurations are possible for a given set of leg lengths. Several extra sensors in addition to those incorporated in the leg equipment have been proposed in the literature in order to obtain a one-to-one correspondence between the measurements and the actual GSP configuration. The proposed procedure makes use of only one additional displacement sensor and relies upon the analytical results available in the literature for a particular type of Stewart platform. The procedure, which uniquely defines the actual configuration of the GSP, is not intended for on-line implementation. Three different algorithms are proposed for computation and their efficiency compared. A case study is reported that confirms the effectiveness of the procedure. © 1999 by ASME.

Determination of the actual configuration of x\\e general stewart platform using only one additional sensor

DI GREGORIO, Raffaele
1999

Abstract

This paper presents a procedure for the determination of the actual configuration of the general geometry Stewart platform (GSP), a fully-parallel manipulator that features two rigid bodies connected to each other via spherical pairs by six controlledlength legs. The six leg length measurements, provided by the displacement sensors incorporated in the leg hardware equipment, do not make it possible to uniquely find the GSP configuration because several configurations are possible for a given set of leg lengths. Several extra sensors in addition to those incorporated in the leg equipment have been proposed in the literature in order to obtain a one-to-one correspondence between the measurements and the actual GSP configuration. The proposed procedure makes use of only one additional displacement sensor and relies upon the analytical results available in the literature for a particular type of Stewart platform. The procedure, which uniquely defines the actual configuration of the GSP, is not intended for on-line implementation. Three different algorithms are proposed for computation and their efficiency compared. A case study is reported that confirms the effectiveness of the procedure. © 1999 by ASME.
1999
Parenticastelli, V.; DI GREGORIO, Raffaele
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/1200986
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 27
  • ???jsp.display-item.citation.isi??? 21
social impact