Despite the wide use of copper alloys in thermo-mechanical applications, there is little data on their cyclic plasticity behaviour, particularly for CuAg alloys. This prevents the behaviour of the materials from being correctly described in numerical simulations for design purposes. In this work CuAg0.1 alloy used for thermo-mechanical applications was tested by strain-controlled cyclic loading at 3 different temperatures (room temperature, 250°C, 300°C). In each test, stress-strain cycles were recorded until the alloy had completely stabilised. These cycles were then used to identify material parameters of non-linear kinematic and isotropic models. The focus was on plasticity models (Armstrong-Frederick, Chaboche, Voce) that are usually implemented in commercial finite element codes. Simulated cyclic responses with the identified material models were compared with experiments and showed a good agreement. The identified material parameters for the CuAg alloy under investigation can be used directly in finite element models for cyclic plasticity simulations, thus enabling a durability analysis of components under thermo-mechanical loads to be performed, particularly in the field of steel-making plants.

Experimental characterisation of a CuAg alloy for thermo-mechanical applications. Part 1: Identifying parameters of non-linear plasticity models

Benasciutti, D.
Primo
;
2018

Abstract

Despite the wide use of copper alloys in thermo-mechanical applications, there is little data on their cyclic plasticity behaviour, particularly for CuAg alloys. This prevents the behaviour of the materials from being correctly described in numerical simulations for design purposes. In this work CuAg0.1 alloy used for thermo-mechanical applications was tested by strain-controlled cyclic loading at 3 different temperatures (room temperature, 250°C, 300°C). In each test, stress-strain cycles were recorded until the alloy had completely stabilised. These cycles were then used to identify material parameters of non-linear kinematic and isotropic models. The focus was on plasticity models (Armstrong-Frederick, Chaboche, Voce) that are usually implemented in commercial finite element codes. Simulated cyclic responses with the identified material models were compared with experiments and showed a good agreement. The identified material parameters for the CuAg alloy under investigation can be used directly in finite element models for cyclic plasticity simulations, thus enabling a durability analysis of components under thermo-mechanical loads to be performed, particularly in the field of steel-making plants.
2018
Benasciutti, D.; Srnec Novak, J.; Moro, L.; De Bona, F.; Stanojević, A.
File in questo prodotto:
File Dimensione Formato  
2018_BENA SRNEC et al_Experimental CuAg plasticity models_Part 1_FFEMS_2018_online.pdf

solo gestori archivio

Descrizione: Full text ahead of print
Tipologia: Full text (versione editoriale)
Licenza: NON PUBBLICO - Accesso privato/ristretto
Dimensione 1.81 MB
Formato Adobe PDF
1.81 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
ffe.12783.pdf

solo gestori archivio

Descrizione: Full text editoriale
Tipologia: Full text (versione editoriale)
Licenza: NON PUBBLICO - Accesso privato/ristretto
Dimensione 1.85 MB
Formato Adobe PDF
1.85 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
11392_2386188_POSTPRINT_Benasciutti_2018 FFEMS Experimental Part 1.pdf

accesso aperto

Descrizione: Post print
Tipologia: Post-print
Licenza: PUBBLICO - Pubblico con Copyright
Dimensione 738.88 kB
Formato Adobe PDF
738.88 kB Adobe PDF Visualizza/Apri

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/2386188
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 19
  • ???jsp.display-item.citation.isi??? 16
social impact