The use of dispersants in particle size analysis is a common practice, but this could cause bias on the gravitational separation of the different particle fractions in natural soil. The study highlights the results obtained in gravitational separation of silty and clayey fractions by using hydrogen peroxide (H2O2) and sodiumhexametaphosphate ((NaPO3)6) in different combinations. The efficiency of the different treatments was verified by comparison against the results obtained on the same sediments without any treatment. The separation method is based on Stokes lawto calculate the settling time of particles in deionizedwater under controlled temperature. This method was applied to three different agricultural soils of the Po River Plain. The sample treated with H2O2 and (NaPO3)6 at 4% showed the best results in terms of particle size degree of purity, ranging from 95% to 97% for clay and from 91% to 95% for silt. The degree of purity indicates the percentage of sediment with the particles of the provided grain sizes.

The influence of disaggregation procedures on soils gravitational separation.

SALEMI, Enzo;TESSARI, Umberto;COLOMBANI, Nicolo';MASTROCICCO, Micol
2014

Abstract

The use of dispersants in particle size analysis is a common practice, but this could cause bias on the gravitational separation of the different particle fractions in natural soil. The study highlights the results obtained in gravitational separation of silty and clayey fractions by using hydrogen peroxide (H2O2) and sodiumhexametaphosphate ((NaPO3)6) in different combinations. The efficiency of the different treatments was verified by comparison against the results obtained on the same sediments without any treatment. The separation method is based on Stokes lawto calculate the settling time of particles in deionizedwater under controlled temperature. This method was applied to three different agricultural soils of the Po River Plain. The sample treated with H2O2 and (NaPO3)6 at 4% showed the best results in terms of particle size degree of purity, ranging from 95% to 97% for clay and from 91% to 95% for silt. The degree of purity indicates the percentage of sediment with the particles of the provided grain sizes.
2014
Salemi, Enzo; Tessari, Umberto; Colombani, Nicolo'; Mastrocicco, Micol
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/2207814
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact